破壞型鋸片
點擊圖片放大商品名稱:
破壞型鋸片
破壞型鋸片
詳細介紹:
破壞型鋸片鋸片是以M-TC的設計，具負數的腹面角度，專用於薄面鋁材的切割。
直徑 (mm) | 刃厚 (mm) | 孔徑 | 齒數 |
184 | 2.4 | 5/8" | 14 |
203 | 2.8 | 5/8" | 18 |
230 | 2.8 | 5/8" | 20 |
255 | 3.0 | 5/8" | 24 |
305 | 3.0 | 1" | 24 |
355 | 3.2 | 1" | 36 |
更多商品
非金屬鋸片
非金屬鋸片適用鋁片、管類和其他非鐵材例如銅、鉛和鎂。為使切割滑順，可使用潤滑油和夾鉗。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 255 3.0 5/8" 60 255 3.0 5/8" 80 305 3.0 1" 60 305 3.0 1" 96 355 3.2 1" 80 355 3.2 1" 100 406 3.2 1" 80 406 3.2 1" 100 455 3.4 1" 80 455 3.4 1" 100
鐵鋸片
此鋸片是以TC和ATB的設計，專於切割各種軟鋼材和實心棒材等金屬材料。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 110 1.7 20 24 110 1.7 20 40 160 1.7 20 28 180 2.0 20 36 180 2.0 20 40 205 2.2 25.4 40 255 2.2 25.4 60 255 2.2 25.4 72 305 2.6 25.4 60 355 2.6 25.4 60 355 2.6 25.4 72
塑膠鋸片
塑膠鋸片是以TC的設計，具負數的腹面角度，專用於薄片塑膠的切割。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 255 3.0 5/8" 60 255 3.0 5/8" 80 305 3.0 1" 60 305 3.0 1" 96 355 3.2 1" 80 355 3.2 1" 100 406 3.2 1" 80 406 3.2 1" 100 455 3.4 1" 80 455 3.4 1" 100
ALUMINUM
For cutting aluminum sheets, tubing extrusions and other non ferrous metals such as copper, brass, lead and magnesium. For smooth cutting, use lots of lubricant and a clamping devise. Diameter (mm) Kerf (mm) Bore Teeth 255 3.0 5/8" 60 255 3.0 5/8" 80 305 3.0 1" 60 305 3.0 1" 96 355 3.2 1" 80 355 3.2 1" 100 406 3.2 1" 80 406 3.2 1" 100 455 3.4 1" 80 455 3.4 1" 100
COMBINATION
All purpose blade designed for ripping, cutting along and across the grain for easy feed in softwood, plywood, chipboard and particle board. The fifth raker tooth is designed to give a clean medium quality cut. For radial arm and table saws. Diameter (mm) Kerf (mm) Bore Teeth 184 2.4 5/8" 35 210 2.6 5/8" 35 230 2.8 5/8" 40 250 2.8 5/8" 50
DEMOLITION
Carbide Tipped Circular Saw with Triplechip tooth and negative hook for thin walled profiles of aluminum. Diameter (mm) Kerf (mm) Bore Teeth 184 2.4 5/8" 14 203 2.8 5/8" 18 230 2.8 5/8" 20 255 3.0 5/8" 24 305 3.0 1" 24 355 3.2 1" 36
FINISHING
For general cutting and trimming of wood, plywood, and sizing pressboard, hardboard, chipboard and particle board, when a nice cut is needed. This blade is furnished with 10° to 20° hook (face) angle for fast feed giving a reasonable finish. For table saws, overhead saws, and radial arm saws Diameter (mm) Kerf (mm) Bore Teeth 110 2.4 5/8" 30 140 2.4 5/8" 30 152 2.4 5/8" 30 184 2.4 5/8" 40 184 2.4 5/8" 40 203 2.8 5/8" 36 203 2.8 5/8" 48 230 2.8 5/8" 48 230 2.8 5/8" 60 255 3.2 5/8" 60 255 3.2 5/8" 80 305 3.2 1" 60 305 3.2 1" 96 355 3.4 1" 80 355 3.4 1" 100 406 3.4 1" 80 406 3.4 1" 100 455 4.0 1" 80 455 4.0 1" 100
PLASTIC
Carbide Tipped Circular Saw with Triplechip tooth and negative hook for thin walled profiles of plastic. For thick wall, use less teeth. Diameter (mm) Kerf (mm) Bore Teeth 255 3.0 5/8" 60 255 3.0 5/8" 80 305 3.0 1" 60 305 3.0 1" 96 355 3.2 1" 80 355 3.2 1" 100 406 3.2 1" 80 406 3.2 1" 100 455 3.4 1" 80 455 3.4 1" 100
