PLASTIC
點擊圖片放大商品名稱:
PLASTIC
PLASTIC
詳細介紹:
Carbide Tipped Circular Saw with Triplechip tooth and negative hook for thin walled profiles of plastic. For thick wall, use less teeth.
Diameter (mm) | Kerf (mm) | Bore | Teeth |
255 | 3.0 | 5/8" | 60 |
255 | 3.0 | 5/8" | 80 |
305 | 3.0 | 1" | 60 |
305 | 3.0 | 1" | 96 |
355 | 3.2 | 1" | 80 |
355 | 3.2 | 1" | 100 |
406 | 3.2 | 1" | 80 |
406 | 3.2 | 1" | 100 |
455 | 3.4 | 1" | 80 |
455 | 3.4 | 1" | 100 |
更多商品
stainless
This saw blade is designed by TC and ATB; used for cutting iron pipes and stainless steels.
Steel
This saw blade is designed by TC and ATB; used for cutting various soft steels, solid bat materials, and metals. Diameter (mm) Kerf (mm) Bore Teeth 110 1.7 20 24 110 1.7 20 40 160 1.7 20 28 180 2.0 20 36 180 2.0 20 40 205 2.2 25.4 40 255 2.2 25.4 60 255 2.2 25.4 72 305 2.6 25.4 60 355 2.6 25.4 60 355 2.6 25.4 72
TCG
For cutting against the grain slow cutting feed. Designed for two sided laminate veneer, and plastic material. Has 5°hook (face) angle for exceptional cutting quality. Diameter (mm) Kerf (mm) Bore Teeth 255 3.2 5/8" 60 255 3.2 5/8" 80 305 3.2 1" 60 305 3.2 1" 96 355 3.4 1" 80 355 3.4 1" 100 406 3.4 1" 80 406 3.4 1" 100 455 3.6 1" 80 455 3.6 1" 100
THIN
This blade is manufactured with good steel and carbide. Diameter (mm) Kerf (mm) Bore Teeth 184 2.0 5/8" 24 184 2.0 5/8" 40 203 2.0 5/8" 40 230 2.4 5/8" 40 255 2.4 5/8" 40
Universal
Designed to cut hard and soft wood. Has a flat tooth pattern or an alternative tooth pattern with 20° hook (face) angle. Performs high speed ripping leaving a rough edge. Used in circular saw benches and multi rip saw machines. Diameter (mm) Kerf (mm) Bore Teeth 110 2.4 5/8" 12 140 2.4 5/8" 12 152 2.4 5/8" 16 184 2.4 5/8" 16 203 2.6 5/8" 18 230 3.2 5/8" 20 255 3.2 5/8" 24 305 3.6 1" 30 355 3.6 1" 36 406 4.0 1" 40 455 4.0 1" 40
一般型鋸片
一般型鋸片：用於硬木和軟木的切割，有平齒型或交叉齒型，以20°的腹面角度之設計， 適用於桌上鋸台與多重功能鋸機。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 110 2.4 5/8" 12 140 2.4 5/8" 12 152 2.4 5/8" 16 184 2.4 5/8" 16 203 2.6 5/8" 18 230 3.2 5/8" 20 255 3.2 5/8" 24 305 3.6 1" 30 355 3.6 1" 36 406 4.0 1" 40 455 4.0 1" 40
不銹鋼鋸片
此鋸片是以TC和ATB的設計，專於切割鐵管和不鏽鋼材料。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 180 2.0 20 48 230 2.2 25.4 48 305 2.6 25.4 80 355 2.6 25.4 80 355 2.6 25.4 100 405 3.0 25.4 100
交叉齒切割鋸片
一般切斷和修整木材，合板和特殊板材，可做為優質的切割。 鋸片為10°至20°腹面角度，適用於桌上鋸台、高架鋸台和旋臂式鋸台。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 110 2.4 5/8" 30 140 2.4 5/8" 30 152 2.4 5/8" 30 184 2.4 5/8" 40 184 2.4 5/8" 40 203 2.8 5/8" 36 203 2.8 5/8" 48 230 2.8 5/8" 48 230 2.8 5/8" 60 255 3.2 5/8" 60 255 3.2 5/8" 80 305 3.2 1" 60 305 3.2 1" 96 355 3.4 1" 80 355 3.4 1" 100 406 3.4 1" 80 406 3.4 1" 100 455 4.0 1" 80 455 4.0 1" 100
