商品名稱:
DEMOLITION
DEMOLITION
詳細介紹:
Carbide Tipped Circular Saw with Triplechip tooth and negative hook for thin walled profiles of aluminum.
Diameter (mm) | Kerf (mm) | Bore | Teeth |
184 | 2.4 | 5/8" | 14 |
203 | 2.8 | 5/8" | 18 |
230 | 2.8 | 5/8" | 20 |
255 | 3.0 | 5/8" | 24 |
305 | 3.0 | 1" | 24 |
355 | 3.2 | 1" | 36 |
更多商品
FINISHING
For general cutting and trimming of wood, plywood, and sizing pressboard, hardboard, chipboard and particle board, when a nice cut is needed. This blade is furnished with 10° to 20° hook (face) angle for fast feed giving a reasonable finish. For table saws, overhead saws, and radial arm saws Diameter (mm) Kerf (mm) Bore Teeth 110 2.4 5/8" 30 140 2.4 5/8" 30 152 2.4 5/8" 30 184 2.4 5/8" 40 184 2.4 5/8" 40 203 2.8 5/8" 36 203 2.8 5/8" 48 230 2.8 5/8" 48 230 2.8 5/8" 60 255 3.2 5/8" 60 255 3.2 5/8" 80 305 3.2 1" 60 305 3.2 1" 96 355 3.4 1" 80 355 3.4 1" 100 406 3.4 1" 80 406 3.4 1" 100 455 4.0 1" 80 455 4.0 1" 100PLASTIC
Carbide Tipped Circular Saw with Triplechip tooth and negative hook for thin walled profiles of plastic. For thick wall, use less teeth. Diameter (mm) Kerf (mm) Bore Teeth 255 3.0 5/8" 60 255 3.0 5/8" 80 305 3.0 1" 60 305 3.0 1" 96 355 3.2 1" 80 355 3.2 1" 100 406 3.2 1" 80 406 3.2 1" 100 455 3.4 1" 80 455 3.4 1" 100stainless
This saw blade is designed by TC and ATB; used for cutting iron pipes and stainless steels.Steel
This saw blade is designed by TC and ATB; used for cutting various soft steels, solid bat materials, and metals. Diameter (mm) Kerf (mm) Bore Teeth 110 1.7 20 24 110 1.7 20 40 160 1.7 20 28 180 2.0 20 36 180 2.0 20 40 205 2.2 25.4 40 255 2.2 25.4 60 255 2.2 25.4 72 305 2.6 25.4 60 355 2.6 25.4 60 355 2.6 25.4 72TCG
For cutting against the grain slow cutting feed. Designed for two sided laminate veneer, and plastic material. Has 5°hook (face) angle for exceptional cutting quality. Diameter (mm) Kerf (mm) Bore Teeth 255 3.2 5/8" 60 255 3.2 5/8" 80 305 3.2 1" 60 305 3.2 1" 96 355 3.4 1" 80 355 3.4 1" 100 406 3.4 1" 80 406 3.4 1" 100 455 3.6 1" 80 455 3.6 1" 100THIN
This blade is manufactured with good steel and carbide. Diameter (mm) Kerf (mm) Bore Teeth 184 2.0 5/8" 24 184 2.0 5/8" 40 203 2.0 5/8" 40 230 2.4 5/8" 40 255 2.4 5/8" 40Universal
Designed to cut hard and soft wood. Has a flat tooth pattern or an alternative tooth pattern with 20° hook (face) angle. Performs high speed ripping leaving a rough edge. Used in circular saw benches and multi rip saw machines. Diameter (mm) Kerf (mm) Bore Teeth 110 2.4 5/8" 12 140 2.4 5/8" 12 152 2.4 5/8" 16 184 2.4 5/8" 16 203 2.6 5/8" 18 230 3.2 5/8" 20 255 3.2 5/8" 24 305 3.6 1" 30 355 3.6 1" 36 406 4.0 1" 40 455 4.0 1" 40一般型鋸片
一般型鋸片:用於硬木和軟木的切割,有平齒型或交叉齒型,以20°的腹面角度之設計, 適用於桌上鋸台與多重功能鋸機。 直徑 (mm) 刃厚 (mm) 孔徑 齒數 110 2.4 5/8" 12 140 2.4 5/8" 12 152 2.4 5/8" 16 184 2.4 5/8" 16 203 2.6 5/8" 18 230 3.2 5/8" 20 255 3.2 5/8" 24 305 3.6 1" 30 355 3.6 1" 36 406 4.0 1" 40 455 4.0 1" 40